About this circuit breaker size calculator
Work out the breaker or fuse rating for a load. Continuous loads are sized at 125 %, motor branch circuits up to 250 % for inverse-time breakers or 175 % for time-delay fuses, and the result is rounded up to the next NEC 240.6 or IEC standard rating.
How to use the Circuit Breaker & Fuse Size Calculator (NEC & IEC)
- Choose NEC or IEC ratings and the system.
- Pick the load type and enter current or power.
- Read the minimum and recommended rating.
Example
24 A continuous load (NEC) → 30 A breaker
Frequently asked questions
Why 125 % for continuous loads?
Standard breakers are only rated to carry 80 % of their rating continuously, so the load is multiplied by 1.25 (NEC 210.20).
Does the wire size have to match?
Yes. The conductor ampacity must be protected by the breaker; check it with the ampacity table.
Is my data safe?
Yes. The tool runs entirely in your browser using WebAssembly. Nothing you type or upload is sent to a server, logged or stored.
Is it free?
Yes, completely free with no sign-up, no limits and no watermarks. It also works offline once the page has loaded.