Free electrical engineering calculators for cable sizing, voltage drop, ampacity, breakers, short-circuit current,
motors, solar and electronic component codes. Every tool supports metric IEC 60364 (mmยฒ) and North American
NEC (AWG / kcmil) conventions where applicable, and runs entirely in your browser.
Cable sizing, voltage drop & wire gauge (IEC mm² and NEC AWG)
Size cables to IEC 60364 (mm²) or NEC 310.16 (AWG / kcmil), check voltage drop and convert between gauge systems.
Protection, fault current & earthing
Choose breakers and fuses, calculate prospective short-circuit current and design earth electrodes.
Power, motors & energy
Convert kW, kVA and amps, size motors, generators and solar systems, and estimate running costs.
Component codes & values
Decode resistor, capacitor and inductor markings and find standard E-series values.
Electronics circuit calculators
Design LED, divider, Zener, timer and filter circuits and convert RF power levels.
Frequently asked questions
Do these calculators support both IEC and NEC?
Yes. Cable size, voltage drop, ampacity, wire resistance and breaker calculators let you choose metric mm² sizes (IEC 60364) or AWG / kcmil sizes (NEC 310.16).
How do I size a cable correctly?
Pick a cable whose derated ampacity exceeds the load current, then check that the voltage drop is within limits (typically 3 % for lighting and 5 % overall). Use the cable size calculator to do both at once.
What is the difference between mm² and AWG?
mm² is the conductor cross-sectional area used internationally; AWG is a logarithmic gauge used in North America where a smaller number means a thicker wire. 12 AWG ≈ 3.31 mm², 10 AWG ≈ 5.26 mm².
Are the results suitable for final design?
The tools are for estimation and learning. Always verify against the wiring regulations adopted in your region and have installations checked by a qualified electrician.