DevToolsHub Free · Fast · 100% in your browser

Voltage Drop Calculator (mm² & AWG)

Calculate cable voltage drop in volts and percent for DC, single-phase and three-phase circuits using metric mm² or AWG/kcmil conductors.

Cable size
Supply voltage (V)
Load current (A)
One-way cable length (m)
Power factor
Reactance (mΩ/m)
Conductor temperature (°C)
Parallel runs per phase
Allowed voltage drop (%)
Voltage drop7.16 V (3.11 %) ✗ exceeds limit
Voltage at load222.84 V
Conductor resistance8.252 Ω/km (2.515 Ω/1000 ft)
Power loss in cable126.7 W
Smallest size within 3 %4 mm²

Vd = 2 × I × L × (R cosφ + X sinφ). R = ρ(T) / A per metre. Need ampacity too? Use the cable size calculator or the ampacity table.

About this voltage drop calculator (mm² and AWG)

Calculate the voltage drop along a cable for DC, single-phase and three-phase circuits. Choose metric sizes in mm² (IEC) or AWG/kcmil (NEC), copper or aluminium conductors, and include power factor, reactance, conductor temperature and parallel runs. The calculator also suggests the smallest cable that stays within your allowed percentage drop.

How to use the Voltage Drop Calculator (mm² & AWG)

  1. Choose the system, conductor material and size standard.
  2. Enter voltage, load current, one-way length and the cable size.
  3. Read the drop in volts and percent and the recommended size.

Example

230 V, 16 A, 30 m of 2.5 mm² copper, single-phase  →  ≈ 7.2 V (3.1 %)

Frequently asked questions

What is an acceptable voltage drop?

IEC 60364 recommends 3 % for lighting and 5 % for other loads from the origin; the NEC informational notes suggest 3 % for a branch circuit and 5 % total.

Should I enter one-way or round-trip length?

One-way. The formula already accounts for the return conductor (×2 for single-phase and DC, ×√3 for three-phase).

Why does aluminium need a larger cable?

Aluminium has about 64 % higher resistivity than copper, so it needs roughly 1.6 times the cross-section for the same voltage drop.

Is my data safe?

Yes. The tool runs entirely in your browser using WebAssembly. Nothing you type or upload is sent to a server, logged or stored.

Is it free?

Yes, completely free with no sign-up, no limits and no watermarks. It also works offline once the page has loaded.

An unhandled error has occurred. Reload ✕