DevToolsHub Free · Fast · 100% in your browser

Short-Circuit Current & HV/LV Cable Withstand Calculator

Calculate prospective short-circuit current at the end of a cable fed from a transformer, and check the cable's thermal withstand (adiabatic k²S² ≥ I²t) for LV and HV cables.

Transformer rating (kVA)
Transformer impedance (%Z)
Secondary voltage (V, line-to-line)
Cable size (mm²)
Cable length (m)
Parallel runs
Cable reactance (mΩ/m)
Fault clearing time (s)
Full-load current1443.4 A
Fault current at transformer terminals25.10 kA
Fault current at end of cable16.88 kA
Cable thermal withstand (0.4 s)54.26 kA ✓ OK for a fault at the source end
Minimum size for withstand111.0 mm² → 120 mm²
k factor143 A·√s/mm²

Transformer impedance Zt = V² / S × %Z, assuming an infinite upstream source. Cable resistance is taken at 20 °C (maximum fault). Adiabatic withstand: I = k × S / √t (IEC 60364-5-54 / BS 7671). Withstand is checked against the source-end current, the worst case for the cable.

About this short-circuit current and cable withstand calculator

Estimate the prospective short-circuit current at a transformer's terminals and at the end of a cable, and check whether the cable can withstand the fault until the protective device clears it. Uses the transformer impedance method and the adiabatic equation k²S² ≥ I²t from IEC 60364 and BS 7671 for PVC and XLPE cables.

How to use the Short-Circuit Current & HV/LV Cable Withstand Calculator

  1. Enter transformer kVA, %Z and secondary voltage.
  2. Choose cable material, insulation, size, length and parallel runs.
  3. Enter the fault clearing time and read the fault current and withstand.

Example

1000 kVA, 5.75 %, 400 V  →  ≈ 25 kA at the transformer

Frequently asked questions

What is the k factor?

A constant depending on conductor and insulation: 115 for copper PVC, 143 for copper XLPE, 76 for aluminium PVC and 94 for aluminium XLPE.

Is this suitable for high-voltage cables?

Yes for a first estimate. Use the medium-voltage secondary voltage and short clearing times; for detailed studies include the upstream grid impedance.

Is my data safe?

Yes. The tool runs entirely in your browser using WebAssembly. Nothing you type or upload is sent to a server, logged or stored.

Is it free?

Yes, completely free with no sign-up, no limits and no watermarks. It also works offline once the page has loaded.

An unhandled error has occurred. Reload ✕